 Origin |
Korea |
'Slot Die Coating System' is the one of most remarkable coating system of pnt. It makes you satisfied with various condition such as coating fluid, flexible design of slot die, freely controlling of the space and coating pressure.
And further, pnt's slot die coating machine serves you excellent coating performance, perfect coating uniformity, minimizing faulty products, manufacturing efficiency and high production.
 |
Basically, general slot die coating macine makes precise coating thickness, width and an intermittent coating possible, but it demands minute machine setting, precious time and operator's effort for adjusting coating condition. However, you can prevent waste of unnecessary time and effort by adopting the high technology of pnt. Why don't you have a satisfaction with high speed through the pnt's precise coating system? |
| Method |
Viscosity range(CPS) |
Coverage uniformity(%) |
| Slot Die |
15 ~ 100,000 |
2 |
 |
The features of pnt's slot die coating machine
- Accurate intermittent coating - It gives a possibility to precise coating by using the quantitative pump.
- Rapid working speed(Maximum 200 m/min)
- Minimizing the loss of the coating fluid
- You can check the state of operating out in real-time.
- The pnt's electric control technology makes easy to handle an intermittent space.
- Excellent precision & uniformity of coating thickness(Minimum 0.5 micron)
- Available low viscosity fluid without any trouble.(Over 15 CPS)
|
| Schema of pnt's slot die |
| |
| Method |
Viscosity range(cps) |
Line Speed range(fpm) |
Wet coverage range(micron) |
Coverage Uniformity(%) |
Cost category |
Layers(no.) |
Substrate Effect |
| Slot die |
15~100,000 |
20~1700 |
10~250 |
2 |
High |
1~3 |
No |
pnt is doing the best for the customer satisfaction to the coating qualities, the uniformity of thickness, the performance, high efficiency and production.
 |
The PDL type coating machine of 'People & technology' is suitable for manufacturing copper foil. This PDL type coating machine is designed for the coating thickness Min. 1 micron, the working speed Max. 50 m/min with specially designed slot die and fluid pouring speed by using 3 dam nozzles.
|
| PDL Type |
| Description |
General Specification |
| Web Materials |
Copper Foil |
| Web Thickness |
15~100 micron |
| Web Width |
Max. 1,100 mm |
| Machine Speed |
Max. 50 m/min |
| Coating Thickness |
1~40 micron(After Dry) |
| Dry Zone Type |
Air Floating Dryer Type |
| Coating Type |
Alot Die Coating System |
| Unwind Diameter |
400 mm |
| Rewind Diameter |
500 mm |
 |
The PCD type coating machine of 'People & technology' is suitable for manufacturing PVDF film which is being broadly used in the high-tech industry because of its great degree of purity, chemical resistance, stability, malleability and easy treatment, Especially, Min. O.5 micron coating thickness and Max. 200 m/min working speed are pride of pnt.
|
| PCD Type |
| Description |
General Specification |
| Web Materials |
PVDF |
| Web Thickness |
80 micron |
| Web Width |
Max. 700 mm ~ Min. 350 mm |
| Machine Speed |
Max. 200 m/min |
| Coating Thickness |
0.5 ~ 5 micron |
| Dry Zone Type |
Air Floating Dryer Type |
| Coating Type |
Slot Die Coating System |
| Unwind Diameter |
500 mm |
| Rewind Diameter |
600 mm |
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page